Aharon AlphaLED X2 Bi-led projector
· Perfect for H4 headlights (fits a lot of vehicles)
· Built-in LED chip
· Intense wide hotspot right below laser-sharp cut-off line
· Full-width efficiency
· Crystal-clear 3.0” glass lens
· Superior active cooling through high-power fan
· Passive cooling through aluminum heat sink
· Internal driver
· Also fits Hella E55 (brackets available on request)
· 2-year warranty & 14-day returns
· Fast worldwide shipping
Are you experiencing poor light output? If you’re like most people who turn to Retrofitlab for help, you own a great car, with not-so-great headlights... Perhaps yours are halogen reflector or projector headlights, which can never be anywhere near as bright as a dedicated LED setup. Or perhaps your old xenon lights have gone downhill to the point where driving in the dark is no longer enjoyable (not to say, it’s become outright dangerous). Either way, you can fast-forward directly to a LED headlight that is vastly superior to both halogen and xenon options used in original/OEM headlights. The Aharon AlphaLED X2 not only offers effortless retrofitting inside H4 headlights as well as direct replacement of Hella E55 projectors; it’s also the very brightest LED projector produced to date - extremely more powerful than benchmark halogen!
A product of years of research and development, the premium AlphaLED X2 retrofit kit ticks all the boxes: Bi-LED functionality (both low- and high-beam LED), superior light output, superior durability and simple installation. The Aharon AlphaLED X2 offers easy replacement of projectors, and thanks to its removable threaded shaft, it can be mounted directly in the bulb ports of halogen reflectors.
Needless to say, each kit includes projectors for both headlights, and you’ll enjoy a comprehensive two-year warranty (to be compared to the limited warranties you’ll see elsewhere).
Here’s why the Aharon AlphaLED X2 is a really bright choice:
-
Superior light output
The AlphaLED X2 is the brightest LED projector we have, and thanks to its LED chip, the light output remains optimal even after the assembly has warmed up. You also enjoy instant max light output on low as well as high beams, and a much smaller decrease in capacity over time as compared to xenon.
-
LED technology
LED has a lot of advantages, high efficiency, no start-up time, no large ballasts, no bulbs that need to be replaced to name a few...
-
Full-width vision
Thanks to the incredible brightness, the wide beam of the AlphaLED X2 isn’t just some faint glow at its extreme ends; you’ll have plenty of light on the dark sides of the road.
-
Laser-sharp cutoff
The beam pattern features a laser-sharp cut-off and a perfect DOT step, ensuring clear vision without distracting other traffic.
-
Strategically positioned, wide hotspot
The Aharon AlphaLED X2 puts its wide hotspot right below the cut-off line, enabling you to detect hazards from far and away.
-
Reliable low & high beams
A durable high beam motor and shield design ensures that you won’t ever be stuck in either low or high beam, and that’s a very good thing, because the high beam of the AlphaLED X2 really is powerful. Not to blind anyone, you’ll want to flick back to low beam long before you pass oncoming traffic.
-
Fool- and waterproof wiring
Wiring is a breeze thanks to the waterproof connectors, and there are little rubber grommets at the cable entries, ensuring that no moisture can enter the housing.
-
Maximum heat dissipation
For optimal performance, LED headlights need to be cooled properly. That’s why the AlphaLED X2 features a powerful cooling fan, with high-quality ball bearings and a precisely engineered impeller (it’s ridiculously durable). Add the lightweight body and the aluminium heat sink, and you can see how it’s possible for this compact LED projector to deliver such an extremely high light output.
-
Effortless retrofit
The Aharon AlphaLED X2 comes with slim separate drivers and removable threaded mounting shafts and adapter rings for easy installation and automatic centring in H4 reflector headlights. It also offers direct replacement of all Hella E55 projectors (brackets available on request, please be aware the lens holder is shorter than the original projector).
-
Retrofitlab warranty and support
All products are inspected by our internal quality control prior to shipping and come with a solid 2-year warranty. You’ll also enjoy complimentary access to our highly rated technical support. Retrofitlab.com has been at the forefront of automotive lighting since 2012, so we can answer most questions immediately. Should you have any queries before or after purchase, please simply refer to our FAQ page or the chat box.
We look forward to brightening your day (not to mention your night)! So don't hesitate and use the AlphaLED to improve your lighting.
Application
The Aharon AlphaLED X2 can be used to replace Hella E55 and G5 projectors. Please be aware, the lens holder is shorter, so there is a larger gap between the lens and the shroud. Perfect for H4 reflector headlights, a minimum depth of 132 mm is required. Because the rear fan runs quite far towards the threaded shaft, the reflector can not be too conical.
Dimensions (+- 0,5mm)
Mounting depth: 132mm
Height: (incl fan guard) 80mm
Width: 106mm
Total lenght incl. threaded shaft: 150mm
Front of lens to mounting bracket (lens holder incl.lens): 118mm
Threaded shaft lenght: 24mm
Threaded shaft diameter: 36mm
Operating hours: 30.000h
Voltage: 9-16V
Power low beam: around 45W
Power High bean: around 52W
Color temperature: around 6000k
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
The product images shown are for illustration purposes only and may not be an exact representation of the product. Actual products may vary due to changes in manufacturing/product enhancements.
The product/kit pictures can differ from what you have received/will receive because we use generic pictures for the kits. Because with all the different options/product changes etc. it's nearly impossible for us to take pictures for all the kits we have and with all the different options. For example, butyl sealant can be shown in the picture, but with headlights that are originally sealed with butyl, it won't be in the kit.
Dimensions (+- 0,5mm)
Mounting depth: 132mm
Height: (incl fan guard) 80mm
Width: 106mm
Total lenght incl. threaded shaft: 150mm
Front of lens to mounting bracket (lens holder incl.lens): 118mm
Threaded shaft lenght: 24mm
Threaded shaft diameter: 36mm
Wiring
Low beam: Blue- and red +
High beam: yellow - and yellow+
Product safety information
Manufacturer information:
Retrofitlab
Mautstraße 2W
Ermelo, Niederlande, 3851SK
info@retrofitlab.com
https://retrofitlab.com
| Item information |
Value |
| Shipping weight: |
1,50 kg
|
| Item weight: |
1,50 kg
|
There are no reviews yet.
